A thin 3D printed plastic cover which fits behind the radiator grill to hide the loudspeaker and held in place with the grill fixing tabs.
A pair of 3D printed replacement Con-Rods to fit the plastic version of the IP Engineering Delux Chassis.
Solid steel disc wheels, 6mm thick and 24mm diameter (28mm over flanges), with a 2mm flange chamfered on the inside edge. Weighing in at 90 gramms per set these wheels will add low down weight and stability to your model.
Availible in 32mm gauge non-insulated only.
4 wheels complete with 2 x 50mm long 3mm diameter axles.
This is a pair of small bogies (as used on Eastwood)
Overall size is 80mm long (50mm wheel base), 63mm wide, 20mm hight (rail to top of frame)
Made from laser cut 3mm birch ply and complete with 24mm dia. steel wheels and brass bearings.
Add a bit of weight to your models with these plated iron weights. They are in pre-cut 5 gram and 10 gram sections with a strong adhesive backing, giving a total of 60 grams for the strip.
A set of 4 track curves designed to fit between the rails of Peco Code 200 Flexitrack to preset either the curve or compound curve that you want.
Available in 48", 60" & 72" radius, SM32mm gauge only